Now accepting HSA/FSA on eligible orders

Learn more
Talk to an Expert Talk to an Expert
Superhuman L1 single-person hard-shell chamber in Matte Black, the viewport and control panel on the left, the control screen on top

Single-person hard-shell chamber

Built to lie flat.

Quiet enough for the room next to the bedroom.

Our single-person, lie-flat hard-shell chamber.

Make it yours

Pick a paint. Interior and logo come next.

Starting price
$49,900

From $49,900

Design yours
Position
Lies flat

Memory foam mattress and pillow.

Pressure
2.0 ATA

1.3, 1.5 or 1.7 ATA selectable.

Footprint
Under 8 ft 3 inUnder 2.5 m

Three cabin widths: 2 ft 6 in, 2 ft 10 in or 3 ft.Three cabin widths: 75 cm, 85 cm or 90 cm.

A closer look

Get to know L1

Built to your order

Paint, interior and logo, picked by you.

Design yours
A woman sitting up inside the Superhuman L1 under violet cabin light, holding an oxygen mask to her face

Your session

The pressure gauge on a Superhuman chamber, close up

Safety

A Superhuman specialist talking a client through the session controls on a chamber touchscreen

Partnership

A phone measuring the L1 in a room in augmented reality, its length, width and height marked
A phone measuring the L1 in a room in augmented reality, its length, width and height marked

Fits your space

Built to your order

Paint, interior and logo, picked by you.

Design yours

From the pillow

What you see, hear and reach.

The session from where you spend it, lying flat with your head by the door.

The cabin of the Superhuman L1 seen lying down: White quilted walls, the control panel by your head, the mattress and the door
The Superhuman L1 from the side, its door slid open onto the White quilted cabin and the control panel inside

01Door

Door and viewport

The door slides along the shell and locks for the session. You see out through it the whole time.

Half your L1, picked here.

  1. Shell Matte Black

  2. Walls White

  3. Monitoring

    Optional sensors, in the configurator

  4. Your quote

    In the configurator

Keep designing 2 of 4 picked
The Superhuman L1 in a sunlit room, Matte Black shell, door open onto White quilted walls
Inside the Superhuman L1 through the open door: White quilted walls, the mattress and the control panel

Before it ships

Your L1 runs 100 hours
before you lie in it.

Every L1 runs 100 hours across its components before it leaves the floor. Every one, not a sample. If anything drifts in that time, it does not ship.

100 hours of testing before it ships

  1. 0 H

    Pressure test to 150% of rated.

    Every shell, above its 2.0 ATA working limit.

  2. 1 to 100 H

    Every component runs under load.

    Together, on the floor, the way it will run in your room.

  3. 100 H

    Record filed under your serial number.

    Our own testing, so we hold the record. Yours is available on request.

Tested to
ASME PVHO-1

Pressure vessels with a person inside. Test record on request.

Certified
ASME Section VIII

Steel, thickness and welds. The factory holds the certificate.

Certified factory
ISO 13485 and 9001

Medical device and general quality management, at the factory that builds every L1.

Declared
CE

EU conformity. Declaration on request.

ASME certification mark Flag of the United States Safety & Standards

Ask us for the paperwork.

Every hard-shell is built in a factory certified by the American Society of Mechanical Engineers (ASME) and pressure-tested to 150% of its rated pressure before it ships. The record for your serial number is yours on request.

Request your paperwork → Safety & Standards

Superhuman L1

The specification.

X-ray line drawing of the Superhuman L1 from the side, the viewport and control panel on the left, the control screen on top
Chamber type
Lie-flat hard-shell
Bed
Memory foam mattress
Maximum pressure*
2.0 ATA
Built-in breathing system
Included
Floor length*
Under 8 ft 3 inUnder 2.5 m
Price
$49,900

* Manufacturer specifications. Final equipment, certification, clearance, floor loading and delivery access are reviewed for your installation.

What happens next

Pick the room.
We handle the machine.

A hand holding a phone open on the fit-call page

01

Design yours

Build it on screen, then send it to us.

A tape measure pulled across the floor of the room where the chamber will go

02

Confirm your space

We check the doorway, floor and power, and pick the cabin width with you.

Our team opening a shipping crate outside a client site, the chamber wrapped in protective foam inside

03

Plan your installation

Delivery, setup and a walkthrough agreed before it leaves the factory.

Arrives together

Arrives complete.

The chamber and the side unit, ready to run.

  • Your L1

    The lie-flat hard-shell, in the paint you picked.

    The Superhuman L1 from the side in Matte Black, its viewport, control panel and control screen
    Make it yours

  • The side unit

    Air compressor, oxygen concentrator and air dryer in one cabinet beside the chamber.

    The side unit: a black cabinet holding the compressor, the oxygen concentrator and the air dryer

Before the call

The questions we hear first.

Will it feel tight in there?

You pick the cabin width, up to 3 ft, and you can see out through the viewport for the whole session. The intercom keeps you talking to the room, and sessions run from 30 minutes, so the first one can be a short one.You pick the cabin width, up to 90 cm, and you can see out through the viewport for the whole session. The intercom keeps you talking to the room, and sessions run from 30 minutes, so the first one can be a short one.

How much space does it need?

Under 8 ft 3 in of floor length, in one of three cabin widths: 2 ft 6 in, 2 ft 10 in or 3 ft. The room size is only half the question: doorways, hallway turns, stairs, elevators, floor loading, and service access all get checked during planning. The side unit sits beside the chamber.Under 2.5 m of floor length, in one of three cabin widths: 75 cm, 85 cm or 90 cm. The room size is only half the question: doorways, hallway turns, stairs, elevators, floor loading, and service access all get checked during planning. The side unit sits beside the chamber.

Clinic, studio, gym, or home?

All of them. Operators run the L1 as a one-client session, with a trained staff member on the outside touchscreen. At home it fits a spare room, a recovery room or the room next to the bedroom. Either way we review the room, delivery path, electrical setup, and intended use before anything ships.

What power and room setup do I need?

A standard household or commercial outlet, 110 V to 240 V. Before delivery we confirm your circuit, ventilation, climate, delivery route, and final placement, so the room is ready before our team arrives.

Does it need oxygen tanks or refills?

No. The onboard oxygen concentrator supplies the mask circuit through the built-in breathing system, so there are no tanks to swap and no refills to schedule.

Is the chamber filled with oxygen?

No. The cabin is pressurized with air, never oxygen. Oxygen reaches you only through the mask circuit, which removes the fire risk of pure-oxygen chamber designs.

Who runs the sessions?

Anyone you choose. A trained operator should be available during every session, and we train yours on-site during install: daily operation, session flow and safety procedures. Inside, the client puts on the mask and presses start. The chamber handles pressurizing, the session, and surfacing.

What pressure does it reach, and how long is a session?

Up to 2.0 ATA, professional-grade. Sessions run from 30 to 120 minutes, with about 10 minutes to reach depth and 10 minutes to surface.

How soon can it be running?

Typically 3 to 5 weeks from order, depending on your location. Install and training happen on-site once it arrives. Tell us when you'd like it running and we work back from it. If the timing is tight, we say so on the call.

Next chapter

Yours from $49,900.

Pick the color and the walls. Then talk it through with an expert. We'll go over your build and check the space, the power and the doorway for you, so there's nothing to measure or photograph beforehand. If it doesn't fit, we'll tell you that too.

Design yours Reserve for $1,000

Or reach the team directly

[email protected] (415) 802-2479

Standard chamber. Upgrades, shipping and installation quoted separately.

The Superhuman L1 from a low front angle, the viewport open and its control screen lit